New Boat

Its always fun to drop a new boat into the market. Immediately the phone rings off the hook and we scramble to meet the immediate demand from dealers looking for a demo boat.I’m sure many of you have seen the rumor mill:

airo0474

Its a completely inflatable kayak with performance levels similar to the venerable Kahuna.

Initially I was sceptical of the whole inflateable program; I am not a fan of the bulgy whale vessels calling themselves kayaks that never leave the shoreline. These boats seemed a regression in our design evolution…..

airo0497

But I slowly came around as Doug modified and tweaked his design. He found subtle beauty in the inflated chambers of the aironaut, creating the look of a whales baleen where normally a puffer fish sits.

I really decided to like this boat once I paddled it. I know I work at FC and this is going to sound rehearsed: but I was blown away (haha). Completely staggered that the boat felt like, well, a Feathercraft. There are no real concessions given, no backward steps in design, this is a boat I will be proud to make.

Paddling it one does notice that you sit a little high, the inflated floor keeping the water line around your butt-cheek level, and therefore projecting more kayak into the wind. But that is the only slightly negative remark I can come up with.

How can you dislike a boat that takes a few minutes to pump up?

And 20 pounds? More like 19.

I’m going for a trip to the Exumas in march and seriously considering taking the Aironaut despite the 200km+ distance I would like to put in. I think it would account for itself very well.

Straight from our website:

Length – 4.5m  (14’ 9”)   Beam – 66cm  (26”)
Cockpit – 75 x 41cm (29.5 x 16”)   Weight – 9kg (20 lbs)
Inflation Time – 6 min

The design has curved hull and side panels with refined bow and stern ends. There is lots of room for paddler and gear, AND it is light and fast on the water. With no frame, assembly is only inflation time. You are on the water in no time.

airo_small

The typical inflatable kayak has two or more large, round air chambers on each side. It has a flat floor and stubby ends, leaving little room for either paddler or gear, and paddling performance is not great.

The Aironaut brings real paddling performance to the world of inflatables.

The Aironaut is made from high quality, technical fabrics made in the U.S. The deck and side panels are a 210 denier urethane coated nylon. The hull is a 420 denier high tenacity urethane coated nylon. Urethane fabrics have a longer life, are of superior quality, and lighter in weight than PVC. For safety, each of the three air chambers have a pressure relief valve, releasing pressure over 5 pounds per square inch. Included: a sea sock for limiting water in the boat, and minimizing abrasion to the inside floor; a spray skirt, inflatable seat and seat back, removable thigh straps for bracing, a double action inflation pump, repair kit, carrying bag, an inflatable paddle float, and a detachable skeg. When the skeg is connected, the boat tracks straight. Without the skeg, the kayak turns on a dime and excels on rivers. Deck Colours – Red or Blue

Advertisements

One thought on “New Boat

  1. The Aironaut looks more narrow than the stated 26 inches but I think that’s because I’m focusing on the blue deck, not the overall beam. It will be interesting to see how it paddles in wind conditions; that seems to be the weak point with all inflatables.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s